NOTICE

This device is sensitive to electrostatic discharge (ESD). To prevent damage to the device, always touch the motorcycle frame or a grounded surface before handling. (00588c)

1.	See Chassis → ABS MODULE → Install → ABS Module Connections. Disconnect ABS connector (3).
2.	Disconnect P&A connector (7).
3.	Disconnect rear stoplamp switch (5).
4.	Remove banjo bolts (1).
5.	Discard gasket washers (2).
6.	Remove ABS module bracket assembly. a. Remove screws (4). b. Remove ABS module and bracket (6).
7.	See Chassis → ABS MODULE → Install → ABS Module Mounting Screws. Remove ABS module from bracket. a. Remove screws. b. Remove ABS module.