| Description | Part Number | Qty. |
|---|---|---|
| RESS REPLACEMENT KIT | HD-52734 | 1 |
| 1. | Stand motorcycle upright (not leaning on jiffy stand) on a level surface. See Maintenance → GENERAL. | |
| 2. | Remove top cover. See Chassis → TOP COVER. | |
| 3. | Remove rear cover. See Chassis → REAR COVER. | |
| 4. | Deactivate electrical system. See Electrical → POWER DISCONNECT. | |
| 5. | Remove skid plate. See Electric Vehicle Powertrain (EVPT) → SKID PLATE. | |
| 6. | Install special tool. Special Tool: RESS REPLACEMENT KIT (HD-52734) a. Support powertrain. | |
| 7. | Remove tail section. See Chassis → TAIL SECTION. | |
| 8. | Loosen drive belt. See Maintenance → INSPECT AND ADJUST DRIVE BELT AND SPROCKETS. |
| 1. | Remove left side covers. See Chassis → SIDE COVERS. a. Remove left side upper cover. b. Remove left side middle cover. | |
| 2. | Disconnect handlebar connectors. See Chassis → HANDLEBAR. a. Throttle grip sensor b. Front turn signals c. Fork lock d. Headlamp e. Hand control modules | |
| 3. | Remove left footrest bracket. See Chassis → RIDER FOOTRESTS. | |
| 4. | Release front brake line from frame and steering head. See Brake Line: Front Caliper to ABS Module in Chassis → BRAKE LINES. |
| 1. | Remove right side covers. See Chassis → SIDE COVERS. a. Remove right side upper cover. b. Remove right side middle cover. | |
| 2. | Remove right footrest bracket. See Chassis → RIDER FOOTRESTS. | |
| 3. | Remove primary cover. See Electric Vehicle Powertrain (EVPT) → PRIMARY COVER. |
| 1. | Remove fairing and brackets. See Chassis → FAIRING. | |
| 2. | Remove headlamp. See Electrical → HEADLAMP. | |
| 3. | Remove handlebar. See Chassis → HANDLEBAR. | |
| 4. | Remove front fork. See Chassis → FRONT FORK. | |
| 5. | Remove steering head/fork stem and bracket assembly. See Chassis → STEERING HEAD. | |
| 6. | Remove power receptacle bracket mounting screws. See High-Voltage System → POWER RECEPTACLE (VEHICLE INLET). |