| 1. | Install power receptacle bracket mounting screws. See High-Voltage System → POWER RECEPTACLE (VEHICLE INLET). | |
| 2. | Install steering head/fork stem and bracket assembly. See Chassis → STEERING HEAD. | |
| 3. | Install front fork. See Chassis → FRONT FORK. | |
| 4. | Install handlebar. See Chassis → HANDLEBAR. | |
| 5. | Install fairing brackets and fairing. See Chassis → FAIRING. | |
| 6. | Install headlamp. See Electrical → HEADLAMP. |
| 1. | Install primary cover. See Electric Vehicle Powertrain (EVPT) → PRIMARY COVER. | |
| 2. | Install right footrest bracket. See Chassis → RIDER FOOTRESTS. | |
| 3. | Install right side covers. See Chassis → SIDE COVERS. a. Install right side upper cover. b. Install right side middle cover. |
| 1. | Attach front brake line to frame and steering head. See Brake Line: Front Caliper to ABS Module in Chassis → BRAKE LINES | |
| 2. | Install left footrest bracket. See Chassis → RIDER FOOTRESTS. | |
| 3. | Connect handlebar connectors. See Chassis → HANDLEBAR. a. Hand control modules b. Headlamp c. Fork lock d. Front turn signals e. Throttle grip sensor | |
| 4. | Install left side covers. See Chassis → SIDE COVERS. a. Install left side upper cover. b. Install left side middle cover. |
| 1. | Adjust drive belt. See Maintenance → INSPECT AND ADJUST DRIVE BELT AND SPROCKETS. | |
| 2. | Install tail section. See Chassis → TAIL SECTION. | |
| 3. | Remove special tool. | |
| 4. | Install skid plate. See Electric Vehicle Powertrain (EVPT) → SKID PLATE. | |
| 5. | Activate electrical system. See Electrical → POWER DISCONNECT. | |
| 6. | Install rear cover. See Chassis → REAR COVER. | |
| 7. | Install top cover. See Chassis → TOP COVER. |