1.	Install idler pulley. See Electric Vehicle Powertrain (EVPT) → TENSIONER PULLEY AND IDLER SPROCKET.
2.	Tighten tensioner. See Maintenance → INSPECT AND ADJUST DRIVE BELT AND SPROCKETS.
3.	Install primary cover. See Electric Vehicle Powertrain (EVPT) → PRIMARY COVER.
4.	Install left and right rider footrests. See Chassis → RIDER FOOTRESTS.
5.	Install rear lighting bracket. See Chassis → REAR LIGHTING BRACKET.
6.	Install mud guard. See Chassis → MUD GUARD.
7.	Install upper and lower belt guards. See Chassis → BELT GUARDS.
8.	Activate electrical system. See Electrical → POWER DISCONNECT.
9.	Install top cover. See Chassis → TOP COVER.