a. Install primary cover. See Electric Vehicle Powertrain (EVPT) → PRIMARY COVER.

b. Attach right rider footrest bracket to frame. See Chassis → RIDER FOOTRESTS.

a. Tighten tensioner. See Remove and Install: Tensioner Pulley in this section.

b. Measure and adjust belt tension. See Maintenance → INSPECT AND ADJUST DRIVE BELT AND SPROCKETS.

c. Install primary cover. See Electric Vehicle Powertrain (EVPT) → PRIMARY COVER.

d. Install right and left rider footrest brackets. See Chassis → RIDER FOOTRESTS.

a. Install pivot shaft. See Chassis → REAR FORK.

b. Install battery box. See Electrical → BATTERY BOX.

c. Install tensioner. See Remove and Install: Tensioner Pulley in this section.

d. Measure and adjust belt tension. See Maintenance → INSPECT AND ADJUST DRIVE BELT AND SPROCKETS.

e. Install primary cover. See Electric Vehicle Powertrain (EVPT) → PRIMARY COVER.

f. Install right and left rider footrest brackets. See Chassis → RIDER FOOTRESTS.