Prepare

1.	Remove top cover. See Chassis → TOP COVER.
2.	Deactivate electrical system. See Electrical → POWER DISCONNECT.
3.	Remove front cover. See Electric Vehicle Powertrain (EVPT) → FRONT COVER.
4.	Drain coolant. See Cooling System → COOLANT.
5.	Remove power receptacle with bracket. See High-Voltage System → POWER RECEPTACLE (VEHICLE INLET). a. Do Not disconnect high-voltage cables.

Remove

1.	See Figure 1. Reposition clamps (1).
2.	Remove hose (2).

Install

1.	Install hose (2).
2.	Reposition clamps (1).

1	Clamp (2)
2	Hose

Figure 1. Hose, Charger to Radiator

Complete

1.	Install power receptacle with bracket. See High-Voltage System → POWER RECEPTACLE (VEHICLE INLET).
2.	Fill coolant. See Cooling System → COOLANT.
3.	Install front cover. See Electric Vehicle Powertrain (EVPT) → FRONT COVER.
4.	Activate electrical system. See Electrical → POWER DISCONNECT.
5.	Install top cover. See Chassis → TOP COVER.