Prepare

1.	Remove top cover. See Chassis → TOP COVER.
2.	Deactivate electrical system. See Electrical → POWER DISCONNECT.
3.	Remove front cover. See Electric Vehicle Powertrain (EVPT) → FRONT COVER.
4.	Drain coolant. See Cooling System → COOLANT.

Remove

1.	See Figure 1. Reposition clamps (1).
2.	Remove hose (2).

Install

1.	See Figure 1. Install hose (2).
2.	Reposition clamps (1).

1	Clamp (2)
2	Hose

Figure 1. Hose, Charger to Filler Neck

Complete

1.	Fill coolant. See Cooling System → COOLANT.
2.	Install front cover. See Electric Vehicle Powertrain (EVPT) → FRONT COVER.
3.	Activate electrical system. See Electrical → POWER DISCONNECT.
4.	Install top cover. See Chassis → TOP COVER.