| 1. | See Electrical → FRONT WIRE HARNESS → Install → USB-C Nut. Remove Universal Serial Bus Type-C (USB-C) nut. | |
| 2. | See Electrical → FRONT WIRE HARNESS → Install → Cable Straps. Discard anchored cable strap (1). | |
| 3. | Discard cable strap (2). | |
| 4. | NOTE Leave chaser wires inside handlebar. a. Attach chaser wires to left and right side handlebar connectors for ease of installation. b. Remove front electrical harness from chaser wires. | |
| 5. | See Electrical → FRONT WIRE HARNESS → Install → Connectors. Discard anchored cable strap. | |
| 6. | Discard cable strap. | |
| 7. | Disconnect connectors (3), (4), (5) and (6). | |
| 8. | Remove front electrical harness. |