Cord Caddy

1.	Remove tail section. See Remove in this section.
2.	Use key, open seat.
3.	Refer to Chassis → TAIL SECTION → Assemble → Cord Caddy.Remove clip (9).
4.	Remove washer (3), spring (2) and pivot pin (1).
5.	Loosen right subframe (7) crossmember screws (5 and 8).
6.	Remove vehicle inlet plug (6).
7.	Remove cord caddy (4).

Latch Assembly

1.	Remove tail section. See Remove in this section.
2.	Use key, open seat.
3.	Refer to Chassis → TAIL SECTION → Assemble → Seat Latch.Remove seat guard (1).
4.	Remove cable from mounting bracket (3).
5.	Remove cable end (6) from lock lever (5).
6.	Remove screws (4).
7.	Remove latch and cable assembly (2).

Lock

1.	Remove tail section. See Remove in this section.
2.	Use key, open seat.
3.	Refer to Chassis → TAIL SECTION → Assemble → Seat Latch.Remove cable from mounting bracket (3).
4.	Remove cable end (6) from lock lever (5).
5.	Use key and unlock seat lock. Remove key.
6.	Refer to Chassis → TAIL SECTION → Assemble → Seat Lock Assembly.Remove screws (5).
7.	Remove seat lock (4).
8.	Remove screws (2).
9.	Remove latch plate (3).

Seat

1.	Remove tail section. See Remove in this section.
2.	Use key, open seat.
3.	Chassis → TAIL SECTION → Assemble → Cord CaddyRemove clip (9).
4.	Remove washer (3), spring (2) and pivot pin (1).
5.	Refer to Chassis → TAIL SECTION → Assemble → Seat Assembly.Loosen front crossmember screws (7).
6.	Remove rear crossmember screws (9).
7.	Remove seat (1)
8.	Remove rear crossmember (11) from seat.
9.	Remove screws (6).
10.	Remove cosmetic cover (10).

Seat Bracket Assembly

1.	Use key, open seat.
2.	Refer to Chassis → TAIL SECTION → Assemble → Seat Assembly.Remove screws (4).
3.	Remove seat bracket (13).
4.	Remove clip (2) and pin (3).