1.	Stand motorcycle upright (not leaning on jiffy stand) on a level surface. See Maintenance → GENERAL.
2.	Remove top cover. See Chassis → TOP COVER.
3.	Remove seat. See Chassis → SEAT.
4.	Deactivate electrical system. See Electrical → POWER DISCONNECT.
5.	Remove bottom pan. See Chassis → BOTTOM PAN.
6.	Remove left and right side footrest brackets. See Chassis → RIDER FOOTRESTS.
7.	Remove sprocket cover, upper and lower belt guards. See Chassis → BELT GUARDS.
8.	Remove drive belt. See Electric Vehicle Powertrain (EVPT) → DRIVE BELT.
9.	Remove jiffy stand. See Chassis → JIFFY STAND.
10.	Remove rear fork. See Chassis → REAR BRAKE MASTER CYLINDER.
11.	Drain coolant. See Cooling System → COOLANT.
12.	Disconnect electric motor to coolant pump hose and battery charger to electric motor coolant hose. See Cooling System → COOLANT HOSES.
13.	Remove right side motor cover. See Chassis → SIDE COVERS.
14.	Remove motor to rear shock dog bone screw. See Chassis → REAR SHOCK ABSORBER.
15.	Relocate motor caddy and harness. See High-Voltage System → VEHICLE INLET.
16.	Disconnect the PEU from the electric motor. See High-Voltage System → POWER ELECTRONICS UNIT (PEU).