| Description | Part Number | Qty. |
|---|---|---|
| DIGITAL TECHNICIAN II | HD-48650 | 1 |
| 1. | Connect the PEU from the electric motor. See High-Voltage System → POWER ELECTRONICS UNIT (PEU). | |
| 2. | Install motor caddy and harness. See High-Voltage System → VEHICLE INLET. | |
| 3. | Remove right side motor cover. See Chassis → SIDE COVERS. | |
| 4. | Connect electric motor to coolant pump hose and battery charger to electric motor coolant hose. See Cooling System → COOLANT HOSES. | |
| 5. | Fill coolant. See Cooling System → COOLANT. | |
| 6. | Install rear fork. See Chassis → REAR BRAKE MASTER CYLINDER. | |
| 7. | Install jiffy stand. See Chassis → JIFFY STAND. | |
| 8. | Install drive belt. Electric Vehicle Powertrain (EVPT) → DRIVE BELT. | |
| 9. | Install sprocket cover, upper and lower belt guards. See Chassis → BELT GUARDS. | |
| 10. | Install left and right side footrest brackets. See Chassis → RIDER FOOTRESTS. | |
| 11. | Install bottom pan. See Chassis → BOTTOM PAN. | |
| 12. | Activate electrical system. See Electrical → POWER DISCONNECT. | |
| 13. | Install motor to rear shock dog bone screw. See Chassis → REAR SHOCK ABSORBER. | |
| 14. | Install seat. See Chassis → SEAT. | |
| 15. | Install top cover. See Chassis → TOP COVER. | |
| 16. | Connect DT and perform Resolver Offset calibration. Special Tool: DIGITAL TECHNICIAN II (HD-48650) |