1.	Remove top cover. See Chassis → TOP COVER.
2.	Remove rear cover. See Chassis → REAR COVER.
3.	Deactivate electrical system. See Electrical → POWER DISCONNECT.
4.	Raise rear wheel for service. See Maintenance → GENERAL.
5.	Remove upper and lower belt guards. See Chassis → BELT GUARDS.
6.	Remove left side sprocket cover. See Chassis → BELT GUARDS.
7.	Remove inlet side cover. See Chassis → SIDE COVERS.
8.	Remove rear lighting bracket. See Chassis → REAR LIGHTING BRACKET.
9.	Remove lower motor cover. See Chassis → SIDE COVERS.
10.	Remove rear shock lower dog bone screw. See Chassis → REAR SHOCK ABSORBER.
11.	Detach rear brake caliper. See Chassis → REAR BRAKE CALIPER.
12.	Disconnect rear wheel speed sensor connector. See Electrical → REAR WHEEL SPEED SENSOR (WSS).
13.	Remove rear wheel. See Chassis → REAR WHEEL.
14.	Remove drive belt. See Electric Vehicle Powertrain (EVPT) → DRIVE BELT.
15.	Remove rear master cylinder reservoir hose p-clamps. See Chassis → REAR BRAKE MASTER CYLINDER.
16.	Remove main wire harness cover (right) screws. See Electrical → MAIN WIRE HARNESS.