1.	Install main wire harness cover (right). See Electrical → MAIN WIRE HARNESS.
2.	Install rear master cylinder reservoir hose p-clamps. See Chassis → REAR BRAKE MASTER CYLINDER.
3.	Install drive belt. See Electric Vehicle Powertrain (EVPT) → DRIVE BELT.
4.	Install rear wheel. See Chassis → REAR WHEEL.
5.	Connect rear wheel speed sensor connector. See Electrical → REAR WHEEL SPEED SENSOR (WSS).
6.	Install rear brake caliper. See Chassis → REAR BRAKE CALIPER.
7.	Install rear shock lower dog bone screw. See Chassis → REAR SHOCK ABSORBER.
8.	Install lower motor cover. See Chassis → SIDE COVERS.
9.	Install rear lighting bracket. See Chassis → REAR LIGHTING BRACKET.
10.	Install inlet side cover. See Chassis → SIDE COVERS.
11.	Install upper and lower belt guards. See Chassis → BELT GUARDS.
12.	Install left side sprocket cover. See Chassis → BELT GUARDS.
13.	Activate electrical system. See Electrical → POWER DISCONNECT.
14.	Install rear cover. See Chassis → REAR COVER.
15.	Install top cover. See Chassis → TOP COVER.
16.	Lower rear wheel.