1.	See High-Voltage System → VEHICLE INLET. Remove screw (3) and ground terminal (4).
2.	Remove screws (2).
3.	See High-Voltage System → VEHICLE INLET. Cut cable strap from wire (3).
4.	Release clip, discard cable strap (2).
5.	See High-Voltage System → VEHICLE INLET. Remove screws (1) and p-clips (2).
6.	Remove screws (6) and p-clips (7).
7.	Discard cable straps (3).
8.	Remove motor caddy (4).
9.	Remove power receptacle (5).