1.	Refer to High-Voltage System → POWER ELECTRONICS UNIT (PEU) → Install → On Board Charger (OBC). Disconnect connector (3).
2.	Remove screws (4).
3.	Remove and discard cable strap (2).
4.	Refer to High-Voltage System → POWER ELECTRONICS UNIT (PEU) → Install → PEU Connections. Disconnect connectors (6).
5.	Remove screws (1).
6.	Remove screws (5).
7.	Remove screw (2).
8.	Remove screws (3) and PEU (4).
9.	Refer to High-Voltage System → POWER ELECTRONICS UNIT (PEU) → Install → O-ring. Discard O-ring.