1.	See Electrical → LEFT HAND CONTROL MODULE (LHCM) → Install → Hand Control Module (Typical). Remove LHCM housing (2). NOTE The LHCM housing screws (1) are captive. a. Loosen screws (1). b. Remove front housing (2).
2.	Remove connectors (3). NOTE The latches on connectors are fragile. Use care when disconnecting. a. See Electrical → LEFT HAND CONTROL MODULE (LHCM) → Install → LHCM Connector (Typical). Using a pick, carefully press connector latch (1) down. b. Use a prying motion on latch while pulling on connector to remove.
3.	See Electrical → LEFT HAND CONTROL MODULE (LHCM) → Install → Hand Control Module (Typical). Release connector latch (2) and rotate switch down.
4.	See Electrical → LEFT HAND CONTROL MODULE (LHCM) → Install → LHCM Connector (Typical). Remove left hand control module. NOTE The latches on connectors are fragile. Use care when disconnecting. a. Using a pick, carefully press connector latch (1) down. b. Use a prying motion on latch while pulling on connector to remove. c. Loosen screw (5). d. Release locator (4). e. Remove hand control module (3).