| 1. | See Electrical → MAIN WIRE HARNESS → Install → Main Wire Harness (right). Remove right portion of wire harness. a. Disconnect coolant pump connector (5). b. Disconnect JSS connector (4). c. Discard cable straps (2). d. Remove screws (1). e. Remove p-clamps (3). | |
| 2. | See Electrical → MAIN WIRE HARNESS → Install → Main Wire Harness (Upper Right). Remove upper right portion of wire harness. a. Remove anchored cable straps (9). b. Disconnect USB-C aux power charge port connector (1). c. Disconnect LV signal connector (2). d. Disconnect LV Power connector (3). e. Disconnect fork lock connnector (4). f. Disconnect TGS connector (5). g. Disconnect front harness connector and release from lock (6). h. Remove screw (8). i. Remove p-clip (7). | |
| 3. | See Electrical → MAIN WIRE HARNESS → Install → Main Wire Harness (left). Remove left portion of wire harness. a. Discard cable strap (1). b. Disconnect front WSS connector (2). c. Disconnect TCU connector (3). d. Disconnect cooling fan connector (4). | |
| 4. | See Electrical → MAIN WIRE HARNESS → Install → Main Wire Harness (right). Remove under seat portion of wire harness. a. Remove cable strap (10). b. Remove ground screws (1). c. Disconnect brake switch connectors (3). d. Disconnect EHCU connector (9). e. Disconnect rear WSS connector (5). f. Disconnect IMU connector (8). g. Remove screws (7). | |
| 5. | Remove main wire harness (4). |