Two-Up Seat Models

1.	Remove top cover. See Chassis → TOP COVER.
2.	Remove rear cover. See Chassis → REAR COVER.
3.	Remove seat and seat latch assembly. See Chassis → SEAT.
4.	Deactivate electrical system. See Electrical → POWER DISCONNECT.
5.	Remove passenger footrests. See Chassis → PASSENGER FOOTRESTS.
6.	Remove splash guard. See Chassis → SPLASH GUARD.
7.	Remove inlet side cover. See Chassis → SIDE COVERS.
8.	Disconnect power receptacle from frame. See High-Voltage System → VEHICLE INLET.
9.	Remove rear shock cover. See Chassis → REAR SHOCK COVER.
10.	Position rear master cylinder reservoir aside. See Chassis → REAR BRAKE MASTER CYLINDER.
11.	Lower BCM caddy. See Electrical → BODY CONTROL MODULE (BCM).

One-Up Seat Models

1.	Remove seat and release cable. See Chassis → SEAT.
2.	Remove rear cover. See Chassis → REAR COVER.
3.	Deactivate electrical system. See Electrical → POWER DISCONNECT.
4.	Remove inlet side cover. See Chassis → SIDE COVERS.
5.	Disconnect power receptacle from frame. See High-Voltage System → VEHICLE INLET.
6.	Remove splash guard. See Chassis → SPLASH GUARD.
7.	Position rear master cylinder reservoir aside. See Chassis → REAR BRAKE MASTER CYLINDER.
8.	Remove rear shock cover. See Chassis → REAR SHOCK COVER.