Two-Up Seat Models

NOTE

Support tail section.

1.	See Chassis → TAIL SECTION → Install → Tail Section. Remove screws (2).
2.	Remove tail section (1).

One-Up Seat Models

Right Tail Section

1.	See Chassis → TAIL SECTION → Install. Remove Body Control Module (BCM) caddy screws (4).
2.	Remove tail section screws (3), washers (2) and tail section (1).

Left Tail Section

1.	See Chassis → TAIL SECTION → Install. Remove charge port bracket screws (1).
2.	Remove BCM caddy screws (3).
3.	Remove tail section screws (4), washers (5) and tail section (2).

Rear Center Frame

1.	See Chassis → TAIL SECTION → Install. Remove screws (1).
2.	Remove rear center frame (2).