1.	Raise rear wheel for service. See Maintenance → GENERAL.
2.	Remove top cover. See Chassis → TOP COVER.
3.	Remove rear cover. See Chassis → REAR COVER.
4.	Deactivate electrical system. See Electrical → POWER DISCONNECT.
5.	Remove mud guard. See Chassis → MUD GUARD.
6.	Remove tail section. See Chassis → TAIL SECTION.
7.	Remove rear shock. See Chassis → REAR SHOCK ABSORBER.
8.	Remove upper and lower belt guards. See Chassis → BELT GUARDS.
9.	Remove rear lighting bracket. See Chassis → REAR LIGHTING BRACKET.
10.	Remove left rider footrest. See Chassis → RIDER FOOTRESTS.
11.	Detach right rider footrest. See Chassis → RIDER FOOTRESTS.
12.	Detach rear brake caliper. See Chassis → REAR BRAKE CALIPER.
13.	Disconnect rear wheel speed sensor connector. See Electrical → REAR WHEEL SPEED SENSOR (WSS).
14.	Remove rear wheel. See Chassis → REAR WHEEL.
15.	Remove drive belt. See Electric Vehicle Powertrain (EVPT) → DRIVE BELT.