1.	Connect high-voltage cable. See Electric Vehicle Powertrain (EVPT) → POWERTRAIN.
2.	Install high-voltage cable cover. See Electric Vehicle Powertrain (EVPT) → HIGH-VOLTAGE CABLE COVER.
3.	Install left lower side cover. See Chassis → SIDE COVERS.
4.	Install ABS module cover. See Chassis → BRAKE LINES.
5.	Attach rear of shock to rear fork. See Chassis → REAR SHOCK ABSORBER.
6.	Tighten tensioner. See Maintenance → INSPECT AND ADJUST DRIVE BELT AND SPROCKETS.
7.	Install primary cover. See Electric Vehicle Powertrain (EVPT) → PRIMARY COVER.
8.	Attach right rider footrest to frame. See Chassis → RIDER FOOTRESTS.
9.	Activate electrical system. See Electrical → POWER DISCONNECT.
10.	Install top cover. See Chassis → TOP COVER.