1.	Remove seat. See Chassis → SEAT.
2.	Deactivate electrical system. See Electrical → POWER DISCONNECT.
3.	Remove bottom pan. See Chassis → BOTTOM PAN.
4.	Disconnect power receptacle connector. See High-Voltage System → VEHICLE INLET.
5.	Drain coolant. See Cooling System → COOLANT.
6.	Remove radiator covers. See Chassis → SIDE COVERS.
7.	Remove radiator to battery charger hoses. See Cooling System → COOLANT HOSES.
8.	Disconnect battery charger to coolant pump hose and battery charger to RESS coolant hose. See Cooling System → COOLANT HOSES.
9.	Remove radiator. See Cooling System → RADIATOR.
10.	Remove lower motor cover. See Chassis → SIDE COVERS.
11.	Remove right side rider foot rest bracket. See Chassis → RIDER FOOTRESTS.
12.	Remove screws and position engine caddy aside. See High-Voltage System → VEHICLE INLET.
13.	Loosen drive belt. See Electric Vehicle Powertrain (EVPT) → DRIVE BELT.
14.	Remove right side rear fork bearing cap. See Chassis → SWINGARM.
15.	Remove three-phase cover. See Electric Vehicle Powertrain (EVPT) → THREE-PHASE COVER.